Project Overview:
As a large steel enterprise, Nanyang Special Steel requires precise measurement of bulk materials such as coke and iron ore powder in its raw material yard for cost accounting and production control. The original belt scale had measurement errors exceeding ± 1.5% for a long time due to factors such as high environmental dust and belt load deviation, and frequent maintenance, which seriously affected production efficiency and management accuracy.
Product debugging site:
Guonuo Technology customizes a high-precision belt scale and intelligent correction system for it, equipped with intelligent instruments and remote monitoring platform.
Guonuo after-sales engineers conduct on-site measurements of belt inclination angle, operating speed, and frame vibration parameters, and customize installation plans for reinforced weighing frames. Afterwards, install the belt scale frame, correction bracket, data substation, and weight control box.
After the hardware devices are installed, prepare to start wiring and powering on. After powering on sensors, instruments, substations, etc., software was installed and multiple debugging and calibration were carried out, ultimately achieving the expected results.
Customer feedback:
The Guonuo high-precision belt scale has completely solved the long-standing measurement problems, especially the impact of belt bias on measurement. Since its operation, there has not been a single abnormal data jump even in high humidity environments during the rainy season. Its remote diagnostic function allows us to view equipment status in the control room, improving maintenance efficiency by more than 50%.
